Extron-electronics TP Receivers Manual de usuario descargar pdf

Setup Guide — TP Receivers

This card provides instructions for an experienced

installer to set up and operate the TP Receiver Series

products.

Refer to www.extron.com for the complete user’s

manual.

Pre-installation — Jumper settings

The TP R BNC A and TP R BNC AV are factory conﬁgured to receive

RGB video. They can receive component, S-video or composite video

by changing jumper J3 located on the main board.

If using the TP R BNC AV with an older TPX 88X transmitter,

download the TP Receivers User’s Manual at www.extron.com

and refer to the audio jumper settings.

Installation

Step 1 — Mounting

Turn off or disconnect all equipment power sources

and mount the receiver as required.

Step 2 — Connect input

Connect the RJ-45 cable (from a TP transmitter)

to the Input port on the TP R.

Terminate the ends of the cable to the same

standards.

Step 3 — Connect outputs

Attach the applicable output cables (video, audio),

depending on the TP R model.

a. Composite video output connector — Connect to the single female BNC

connector (VIDEO) for composite video output (TP R BNC AV Only) or to

either the R, or G, or B connectors (TP R BNC A Only).

b. S-video output connector — Connect to the R (C-chroma) and G (Y-luma)

connectors.

c. Component video — Connect to the R (R-Y), G (Y) and B (B-Y) connectors.

d. RGBHV Video — Connect to the R, G, B, H, V connectors.

e. RGBS video — Connect to the R, G, B, H/V connectors.

f. High resolution video output connector — Connect to the 15-pin HD

connector (TP R 15HD A only).

g. Audio connector — Connect an audio device accepting line level analog

audio to the unbalanced stereo audio RCA connectors (TP R BNC A and

TP R BNC AV) or to the line level stereo 3.5 mm, 5-pole captive screw

connectors as shown.

Wire color

White-green

NOTE If using Enhanced

Skew-Free™ A/V cable, use th

TIA/EIA T568A standard only.

Green

White-orange

White-blue

Orange

White-brown

Brown

Wire color

T568A T568B

White-orange

Orange

White-green

White-blue

Green

White-brown

Brown

Side

Blue Blue

Insert

Twisted Pair

Wires

Pins:

1 2345678

RJ-45 Connector

For unbalanced audio, connect both sleeves to the center (ground

)

contact. DO NOT connect the sleeves to the negative (-) contacts.

Unbalanced Output

Balanced Output

Do not tin the wires!

Tip

Ring

Tip

Ring

L R

Sleeves

NO GROUND HERE

Tip

L R

Sleeves

RGB

Component,

S-video,

Composite

Continued on other side

1 2

Indice de contenidos

Pagina 1 - Setup Guide — TP Receivers

Setup Guide — TP ReceiversThis card provides instructions for an experienced installer to set up and operate the TP Receiver Series products. Refer t

Pagina 2 - Step 6 — Manual/Auto Switch

Step 4 — PowerPlug the included external power supply into the 2-pole (TP R 15HD A) or 3-pole (TP R BNC A) captive screw connector. Wire the connecto

Comentarios a estos manuales

Sin comentarios

Extron-electronics TP Receivers Manual de usuario

Busca en linea o descarga Manual de usuario para Accesorios de audio Extron-electronics TP Receivers. Extron Electronics TP Receivers User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios de audio Extron-electronics TP Receivers