Extron-electronics DVS 304 Series Setup Guide Manual de usuario

Busca en linea o descarga Manual de usuario para Accesorios para vídeo Extron-electronics DVS 304 Series Setup Guide. Extron Electronics DVS 304 Series Setup Guide User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 4
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
The Extron DVS 304 Series of video and RGB digital scalers incorporate advanced technology
to provide high performance video processing with selectable output rates up to 1920x1200
(DVI models only) and HDTV 1080p, as well as simultaneous DVI (DVI models only) and
analog RGB or component video outputs.
This setup guide allows quick and easy set up and conguration of a DVS scaler using step by step instructions. It covers
performing basic operations using the front panel controls and selected Simple Instruction Set (SIS
) commands.
N
For full installation, configuration, and operation details, refer to the DVS 304 Series User’s Manual, online at www.extron.com.
Installation — Rear Panel Features (DVS 304 DVI AD model shown)
INPUTS OUTPUT
RS-232
LAN
RESET
ACTLINK
50/60 Hz
100-240V .3A
2
1
3
4
LR
LR
LR
LR
LR
AUDIO
VID
1
2
3
4
Y
/VID
R-Y
H/
HV
R
/R-Y
V
G
/Y
B
/B-Y
DVI-I
YC
SDI
B-Y
/C
RGB/R-Y, Y, B-Y/YC/VID
I
N
P
U
T
O
U
T
P
U
T
6
3a
3
7
4
5
9
1
2
11
8
10
DVS 304 DVI AD
Power and video input connections Output and control connections
a AC power connector g Audio output connectors - (audio models only)
b Audio input captive screw connectors (inputs 1 to 4) - audio models only h RGB/YUV-HD BNC and DVI* output connectors
c Composite video BNC connector (input 1) i Reset button and LED
Ñ (Optional) SDI BNC connectors (congurable) j RJ-45 Ethernet connector
d Composite video/S-video/component video BNC connectors (input 2) k 9-pin D RS-232 connector
e S-video 4-pin mini-DIN connector (input 3)
f 15-pin HD connector (input 4) with EDID emulation*
Installation and cabling
Step 1 — Mount the DVS
Turn off or disconnect all equipment power sources and rack mount the DVS unit, using
suitable mounting brackets or rack shelf (see image at right).
Refer to the DVS 304 Series Users Manual for details.
Step 2 — Connect inputs
Connect inputs from video and/or audio sources to the applicable connectors marked
“Inputs” (see b to f above for connector types). See diagrams below for signal format on BNC
connectors and audio input captive screw wiring (balanced or unbalanced, mono or stereo).
N When connecting a VGA input to a DV 304 DVI model, by default the EDID emulation is set to match the current output rate. To set to a specific rate,
or set to a display's EDID rate, or to upload a custom EDID table refer to the DVS 304 Series User’s Manual, available at www.extron.com.
Component video
(Y, R-Y, B-Y)
S-video
Composite video
B-Y
/C
Y
/VID
R-Y
B-Y
/C
Y
/VID
R-Y
B-Y
/C
Y
/VID
R-Y
Input 2
Input 4
Pin 1
15-HD pins Pin 2
Pin 3
Pin 13 Pin 14
Input source
BNC’s
R
V
H
B
G
RGB
RGBcvS
YUV
S-video
Composite video
R
G(S)
B
HV
R
G
B
cvS
R-Y
Y
B-Y
Y
C
Y
DVS 304 Series – Setup Guide
Rack Mount
Bracket
Unbalanced Stereo Input
Tip
Sleeve
Sleeve
Tip
L R
Unbalanced Mono Input
Balanced Mono Input
L R
Tip
Ring
Sleeve
Tip
Ring
L R
Tip
Sleeve
Tip
Sleeve
Balanced Stereo Input
L R
Tip
Ring
Sleeve
Tip
Ring
Do not tin the wires!
N * DVI models only. Non DVI models have a 15-pin HD connector
in place of the DVI connector and do not feature EDID emulation.
68-1039-50
Rev. A
08 09
Vista de pagina 0
1 2 3 4

Indice de contenidos

Pagina 1 - DVS 304 Series – Setup Guide

The Extron DVS 304 Series of video and RGB digital scalers incorporate advanced technology to provide high performance video processing with selectabl

Pagina 2 - Default Display Cycle

DVS 304 Series • Setup Guide2DVS 304 Series — Setup Guide (cont'd)Step 3 — Connect outputsConnect video and audio output devices to the applicabl

Pagina 3

3DVS 304 Series • Setup GuideFront Panel Overview1DVS 304VIDEO AND RGB SCALERADJUSTIR2 3 4 MENU NEXT3456 721a Input selection buttons — Select/switch

Pagina 4 - = Input number (1 – 4)

DVS 304 Series — Setup Guide (cont'd)Commands ASCII command(host to switcher) Response(switcher to host)Additional descriptionInput selection — v

Comentarios a estos manuales

Sin comentarios