Extron-electronics JMP 9600 User Guide Manual de usuario Pagina 106
- Pagina / 122
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Mounting and
Maintenance
This section details the following JMP 9600 Media Player procedures:
• Mounting the Media Player
• Cleaning the Air Filters
• Changing Fuses
• Battery Precautions
Mounting the Media Player
The JMP 9600 Media Player is housed in a rack-mountable, 2U high metal enclosure. It can
be set on a tabletop or installed in a standard 19-inch wide rack.
Ventilation Guidelines
NOTE: When installing multiple JMP 9600 units in an equipment rack or other
enclosed area, it is highly recommended that the space be equipped with an
active cool air intake and warm air exhaust system.
To allow sufficient ventilation and cooling, consider the following:
• Maintain a clear space at all times at the sides (2 inches [51 mm]) and rear (6 inches
[152 mm]) of the player. This clear space must also allow vertical air movement. You can
run cables in this space but dress the cables clear of any ventilation holes.
• Keep the front of the player clear of obstructions at all times.
• Do not impede the air ow into and out of the unit by covering the ventilation holes.
These requirements are usually met by any typical 19-inch rack mount environment.
Tabletop Use
Affix the included rubber feet to the bottom of the unit and place it in any convenient location.
Rack Mounting
UL guidelines
The following Underwriters Laboratories (UL) guidelines pertain to the installation of the
media player into a rack.
1. Elevated operating ambient temperature — If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may be greater
than room ambient. Therefore, consider installing the equipment in an environment
compatible with the maximum ambient temperature specied by Extron (Tma = 104 °F
[+40 °C]).
JMP 9600 Media Player • Mounting and Maintenance 100
- User Guide 1
- JMP 9600 1
- Safety Instructions • English 2
- 安全须知 • 中文 2
- FCC Class A Notice 3
- Copyright 4
- Trademarks 4
- Contents 5
- Introduction 7
- Framespersecond(Fps) 9
- Installation 12
- Video and Audio Outputs 13
- LAN Ports 15
- Remote Control Port 16
- Digital Inputs and Relays 17
- Operation 19
- Status LEDs 20
- Transport Buttons 21
- LCD and Menu Controls 21
- Encoder knob 21
- Menu System Overview 22
- Channel status menus 23
- Playlist and Clip fields 24
- Video selection 25
- Frame selection 25
- Shuttle selection 25
- Loop selection 26
- Mute selection 26
- Settings menu 26
- Audio submenu 27
- Autostart submenu 28
- Date and Time submenu 29
- LCD submenu 30
- Networking submenu 31
- Ping IP selection (see 34
- Ping control ( 34
- Reboot submenu 35
- Serial Ports submenu 35
- System Info selection 36
- Video submenu 37
- Figure 29. Mode Selection 38
- PREVENTER 39
- Help menu 40
- System Status menu 40
- License Keys menu 40
- Serial number nnnn 41
- Play a Presentation 42
- HTML Operation 43
- Player Control Page 44
- Real time status display 45
- Transport controls 46
- Set as Autoplay ( 48
- Ok button ( 48
- Playlist Editor Page 49
- Remove button on the 51
- Setup Functions 53
- Autoplay Setup Dialog Box 54
- Network Setup Dialog Boxes 54
- Player Info Setup Dialog Box 56
- Serial Port Setup Dialog Box 57
- Video Setup Dialog Boxes 58
- Video HD-SDI setup box 59
- About Setup Dialog Box 60
- Programming 61
- Default IP Addresses 62
- Host-to-Player Instructions 63
- Symbol Definitions 64
- Command MSVPP Command 66
- Response 66
- Additional description 66
- (host to unit) 71
- (unit to host) 71
- Detailed System 82
- Interaction 82
- Delete ( 85
- Yes to confirm the deletion ( 85
- Loading and Updating firmware 86
- Synchronization 89
- Master Player Slave Player 90
- ESGEN vs. traditional Genlock 92
- TCStart command is received 96
- Play At and Start At times 97
- R1 R3 R4R2 99
- Set input trigger 100
- Command Function 101
- Encoding Guidelines 102
- Video track files 103
- Audio track files 103
- Frames per second (Fps) 104
- Resolution 104
- JPEG-2000 Restrictions 105
- Mounting and 106
- Maintenance 106
- Bracket uses 107
- 3 screws 107
- Handle uses 107
- 2 screws 107
- Cleaning the Air Filters 108
- Changing the Fuses 109
- Battery Precautions 110
- Ethernet 111
- Connection 111
- Connecting as a Telnet Client 114
- Telnet Tips 114
- Subnetting — A Primer 115
- Subnet Masks and Octets 116
- ≠ in figure 87, example 2 and 116
- Reference 117
- Information 117
- Digital I/O control 119
- Part Numbers 120
- Cable assemblies 121
- Extron Warranty 122
Relacionado con productos y manuales para Accesorios para vídeo Extron-electronics JMP 9600 User Guide
(64 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.060 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales