Extron-electronics MLS 608 D Series User Guide Manual de usuario descargar pdf (Pagina 80)

100

Command ASCII Command

(host to switcher)

Response

(switcher to host)

Additional

Description

EDID Management

Assign EDID data to

inputs (analog and

digital inputs)

EAX2@*X2!EDID} EdidAX2@*X2!]

Assign EDID data X2!

to inputs VGA or HDMI

X2@

View EDID data

assigned

EAX2@EDID}

X2!]

View EDID data

assignment.

Save an output

EDID to (analog)

user loaded space

ESX2#*X2$EDID} EdidSX2#*X2$]

Save display EDID to

analog user space.

Save an output

EDID to (digital)user

loaded space

ESX2#*X2%EDID} EdidSX2#*X2%]

Save display EDID to

digital user space.

View/read EDID in

hex format

ERX2@EDID}

X2&]

View EDID data in hex

format for X2@.

View EDID native

resolution

ENX2@*X2^EDID}

X2*]

View native resolution

and refresh rate.

HDCP Management

View input HDCP

status

EIX2(HDCP}

X3!]

Signal present, HDCP,

non HDCP, or HDCP

status unknown.

View output HDCP

EOHDCP}

X3@]

Output connected,

HDCP, non HDCP, or

HDCP status unknown.

View HDCP status

for all HDMI inputs

EI*HDCP} X3!

*X3!

]

HDCP, non HDCP, or

HDCP status unknown

(for all HDMI inputs).

Set HDCP

notification

ENX3#HDCP} HdcpNX3#]

Show green or black

screen.

View HDCP

notification setting

ENHDCP}

X3#]

NOTE: X2! = DDC value (EDID). See EDID table on page 66 for details.

X2@ = Video group: 1 = VGA, 2 = HDMI

X2# = Output selection: 1 = analog buffered VGA connector on MLS 608 D, 2 = digital HDMI connector on

MTP/HDMI U R

X2$ = Analog EDID user denable locations: 49 = user 1, 50 = user 2

X2% = Digital EDID user denable locations: 51 = user 3, 52 = user 4

X2^ = EDID, 0 = current assigned EDID: 1 = user loaded 49 when X2@ = 1, user loaded 51 when X2@ = 2;

2 = user loaded 50 when X2@ = 1, user loaded 52 when X2@ = 2

X2& = 128 or 256 byte EDID raw hex (text form)

X2* = Native resolution and refresh rate, for example 1280x720@60

X2( = Inputs 5 through 8 only (for HDCP commands)

X3! = Input HDCP status: 0 = source is connected but not HDCP compliant, 1 = source is connected and is HDCP

compliant, 2 = no source connected, 3 = HDCP status not known

X3@ = Output HDCP status: 0 = output is connected, current input source encrypted, output is not HDCP compliant,

1 = output is connected, current input source encrypted, output is HDCP compliant, 2 = no output connected,

3 = output is connected, current input source is not encrypted or not connected, output HDCP status not known

X3# = HDCP notication = green screen notication on the output when a display is non-HDCP compliant: 0 = black,

1 = green (default)

MLS 608 D Series • SIS Programming and Control 74

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 99 100

Comentarios a estos manuales

Sin comentarios

Extron-electronics MLS 608 D Series User Guide Manual de usuario Pagina 80

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios para vídeo Extron-electronics MLS 608 D Series User Guide