Extron-electronics MPS 601 Setup Guide Manual de usuario descargar pdf

IMPORTANT:

Go to www.extron.com for the complete

user guide, installation instructions, and

specifications before connecting the

product to the power source.

MPS601 Series • Setup Guide

This guide provides basic instructions for an experienced technician to install, set up, and operate the Extron Media Presentation

Switcher, MPS601. Installation and service must be performed by authorized personnel only. For additional information and

specications, see the MPS601 product page at www.extron.com.

Step 1 — Mount the MPS601

The MPS601 is housed in a half rack width, 6 inch deep, 1U high metal enclosure that can sit on a table with the provided rubber

feet or can be rack mounted. Select a suitable mounting location, then choose an appropriate mounting option.

Step 2 — Cable the Switcher

0.5 A MAX

POWER

12V

INPUTS

MPS 601

CONTACT IN / TALLY OUT

HDMI

RGBHV

HDMI

RS-232

135

246

TTCG TCG

GCT TCG T

Tx Rx G

OUTPUT

REMOTE

ab dec

Figure 1. MPS601 Rear Panel

Power and Input Connections Output Connection Control Connections

a DC power connector — Connect the

provided 12VDC power supply.

b Two analog 15-pin HD (RGBHV)

connectors (numbered 1 and2).

e HDMI video output — One female

HDMI connector

f Contact In/Tally Out —Six 3.5mm,

3-pole captive screw connectors for

input switching and tally indication

using Extron Show Me cables.

c Two female 3.5 mm TRS connectors

(letter A and B on the rear panel)

corresponding to the two RGBHV

video inputs.

d Four HDMI connectors for HDMI

compliant audio and video input

(numbered 3, 4, 5 and 6).

g +V Port — 3-pole 3.5mm captive

screw connector for +V output.

h Remote — 3-pole, 3.5mm captive

screw RS-232 connector.

Connect Inputs

1. RGBHV video inputs — Connect analog video sources to the HD connectors (see gure 1,

). The connectors accept VGA

signals.

NOTE: The MPS601 digitizes the RGBHV inputs. It does not scale or convert video to a different resolution. The

output signal resolution is the same as the input resolution.

2. Analog audio inputs — By default, audio input A is tied to RGBHV input 1 and audio input B is tied to RGBHV input 2 (see

gure 1,

). Analog audio is digitized for HDMI output.

3. HDMI video inputs — Connect digital HDMI sources to these inputs using standard HDMI cables (see gure 1,

Connect Output

HDMI video output — Connect an HDMI display device using a standard HDMI cable (see gure 1,

1 2 3 4

Indice de contenidos

Pagina 1 - MPS601 Series • Setup Guide

1IMPORTANT:Go to www.extron.com for the complete user guide, installation instructions, and specifications before connecting the product to the power

Pagina 2 - Connect Control Devices

2MPS601 • Setup Guide (Continued)Connect Control DevicesNOTE: Do not tin the leads. Tinned wires are not as secure in the connector and could be pu

Pagina 3 - Setup and Operation

3ATTENTION:• Always use a power supply provided by or specied by Extron. Use of an unauthorized power supply voids all regulatory compliance certi

Pagina 4 - Executive mode

4e Output signal LED. This LED lights when the HDMI output is connected to a display or sink device.f HDCP input signal LEDs (inputs 3, 4, 5, and 6

Comentarios a estos manuales

Sin comentarios

Extron-electronics MPS 601 Setup Guide Manual de usuario

Busca en linea o descarga Manual de usuario para Accesorios para vídeo Extron-electronics MPS 601 Setup Guide. Extron Electronics MPS 601 Setup Guide User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios para vídeo Extron-electronics MPS 601 Setup Guide