Extron-electronics MTP AV Series User Guide Manual de usuario descargar pdf (Pagina 20)

MTP AV Series • Operation 14

Operation

This section describes:

• Front Panel Features

• Troubleshooting — Skew Delay Compensation

Front Panel Features

SHARP

C GAIN

Y GAIN

SHARP

GAIN

MTP R S-video Receiver

Front Panel

MTP R Composite Video

Receiver Front Panel

2331231

Figure18. MTP Receiver Front Panels

a Power LED — When lit, this LED indicates power is applied to the MTP.

b Sharpness — Adjusts the output image sharpness for long cable runs.

c Gain control — Adjusts the brightness of the output image to compensate for long

cable runs.

Composite video receivers — There is only one gain control on composite video MTP

receivers.

S-video receivers — There are separate controls for luminance (Y) and

chrominance(C) on S-video MTP receivers. If the S-video output chrominance setting

on the MTP receiver is too low, the image may appear in monochrome. Adjust the

chrominance (C gain) until color appears.

NOTE: All control knobs are removable to limit access if desired.

Troubleshooting — Skew Delay Compensation

CAT 5 TP cable can cause registration errors (in which luminance leads or lags

chrominance) between the Y and C video signals on S-video transmitter/receiver pairs. Try

using the following methods to minimize or eliminate pair skew:

• Switch to Extron Enhanced Skew-Free AV UTP cable.

• Add an S-video-to-BNC adapter and a skew compensation cable equal to the length of

pair skew to the receiver output.

• Install an S-video-to-BNC adapter and an SEQ 100 15HD Skew Equalizer on the

receiver video output and adjust the skew for the leading video image.

1 2 ... 15 16 17 18 19 20 21 22 23

Sin comentarios

Extron-electronics MTP AV Series User Guide Manual de usuario Pagina 20