Extron-electronics SW DVI Plus Series User Guide Manual de usuario Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 45
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
SW DVI Plus Series • Operation 17
17
Resetting
To reset the switcher to its factory default settings:
1. Press and hold the Input 1 button while power is being applied to the unit.
2. Continue holding the Input 1 button until the power-up sequence completes.
NOTE: Resetting restores the EDID mode to automatic, with a resolution of
1024x768 @ 60 Hz. If a display is connected at the time of the reset, its EDID
information is detected and stored at the inputs.
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 44 45

Comentarios a estos manuales

Sin comentarios