Extron-electronics SW YUV A Series User Guide Manual de usuario descargar pdf (Pagina 32)

Remote Control, cont’d

SW RGB and YUV A Switchers • Remote Control4-4

Command/Response table for SIS commands

Command ASCII Command Response Additional description

(host to switcher) (switcher to host)

Input selection

Select video and audio input

! In

•All Select input

video and audio.

Example (SW4 RGBHV A): 3! In3•All Select input 3 video and audio.

Example (SW6 RGBHV): 5! In5•All Select input 5 video.

Select video input only

& In

•Vid Select input

video only (audio

breakaway).

Select audio input only

$ In

•Aud Select input

audio only

(SW 2/4/6 RGBHV A only) (audio breakaway).

ASCII to HEX Conversion Table

Space

Symbol definitions

Input and output numbers in commands may be entered as either 1-, 2-, or 3-

digit numbers. All input and output numbers are specified as 3-digit numbers

in the response.

= CR/LF (carriage return/line feed) (0x0D 0A)

= CR (carriage return, no line feed)

• = space

= Input number 0 through the maximum number of inputs (0 =

muted output)

= Input number 1 through the maximum number of inputs

= Input signal status 0 = no signal detected, 1 = signal detected

= On/off 0 = off, 1 = on

= Numeric value -18 dB to +24 dB, each step = 1 dB

= Audio gain 0 to 24

= Audio attenuation 1 to 18

= Controller firmware x.xx

= Switch mode 1 = normal switch mode, 2 = autoswitch mode

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

Sin comentarios

Extron-electronics SW YUV A Series User Guide Manual de usuario Pagina 32