Extron-electronics System 5 IP Series User Guide Manual de usuario descargar pdf (Pagina 89)

5-33System 5 IP • SIS

™

Programming and Control

PRELIMINARY

Command/response table for special function SIS commands, continued

Command ASCII Command Response

values

(host to System 5) (System 5 IP to host) and additional descriptions

Power amp limit

*56 # AmpLimit*

Limit amplifier output when

volume is at maximum level.

For

0 = 0 dB attenuation (default),

1 = 1 dB attenuation,

2 = 2 dB attenuation,

…,

20 = 20 dB attenuation.

Set the left-right audio balance

*22 # Balance*

Set the attenuation applied to

the left and right audio

channels.

can be step 0 to

step 30:

0 = attenuate the left audio

channel 100% (mute the left)

…

15 = 0 dB attenuation for both

channels (default)

…

30 = attenuate the right channel

100% (mute the right).

Set the Preamp audio output’s level

*40 # LineOut*

1 = -10 dBV (-8 dBu, 0.32 Vrms),

unbalanced output (default)

2 = +4 dBu (+6 dBV, 1.23 Vrms),

balanced output

If the connector is wired for balanced output, the level will be +6 dB higher than if it is wired for unbalanced output.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 125 126

Sin comentarios

Extron-electronics System 5 IP Series User Guide Manual de usuario Pagina 89