VN-Matrix Series
VNM Enterprise Controller
VN-Matrix Enterprise Controller
The VNM Enterprise Controller is a dedicated controller for VN-Matrix
®
systems. The VNM Enterprise Controller simplifies management of large VN-Matrix deployments, providing the
ability to configure and dynamically control one or many VN-Matrix devices from a single user interface.
Every VN-Matrix device in a system can be accessed and configured using a simple, embedded web interface. The standard embedded web interface is useful for configuring smaller
systems limited to a few units or systems that will be left in a fixed operational state. VNM Enterprise Controller provides the greater processing capacity required to efficiently manage,
configure, and dynamically control large VN-Matrix systems. VNM Enterprise Controller allows streaming and recording system presets to be created that can be quickly recalled from
an AV control system. Each preset captures all VN-Matrix device settings and defines specific streaming connection and recording actions. Recall of various streaming and recording
presets greatly simplifies management and control of VN-Matrix systems.
The VNM Enterprise Controller’s embedded web interface also allows users to quickly organize and sort all devices in a system based on different properties such as: unit status or type,
operating mode, source, controller, or firmware version. VN-Matrix devices can be selected in groups, and common configuration properties can be applied to all devices. Firmware can
also be uploaded to all devices or a group of devices in one action. Multiple VNM Enterprise Controllers can be applied in VN-Matrix systems, providing control over the entire system or
independent clusters of VN-Matrix devices.
Two VNM Enterprise Controller units can be configured to operate together as a redundant system for mission-critical applications. One unit is configured as a primary unit, and the other
as a secondary unit. System data is continuously synchronized between the redundant pair. The secondary unit continually monitors the primary unit’s system health and seamlessly
takes control if required. Control is automatically returned to the primary unit if required, maintaining transparent communications and control over the VN-Matrix system.
The VN-Matrix Enterprise Controller is required when:
• More than 10 VN-Matrix units are configured into a system
• The system includes VN-Matrix recording devices or VNS 104 Multi-Stream Decoding Software
• Preset streaming and recording configurations must be prepared and recalled
• A system of VN-Matrix units will be dynamically controlled in a virtual switching solution that is managed from an AV control system
• Clusters of VN-Matrix units must be managed independently and as one large system
• Redundant control is required for the system
Features
• Create and recall system streaming and recording preset configurations
• Monitor, configure, and manage all VN-Matrix and VN-Matrix Recorder units as a system
• High level interface provides single point of control for external control systems
• Manage multiple VN-Matrix systems in combined or independent clusters
• Provide redundant control for mission-critical applications
• Standard model employs hard disk storage
• Model with flash storage is available for applications requiring the reliability of a completely solid state system, and temporary removal of sensitive system data
Model Version Description Part Number
VNM Enterprise Controller VN-Matrix Enterprise Controller
60-1133-01
VNM Enterprise Controller CFC VNM Enterprise Controller with CF Drive
60-1133-02
(8 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales