Extron-electronics SMB 100 Series Installation Manual de usuario descargar pdf

IMPORTANT:

Refer to www.extron.com for the

complete user guide, installation

instructions, and specifications.

SMB 100 Series • Installation Guide

The Extron SMB Series Surface Mount Boxes are designed for mounting various Extron architectural products, including wall

plates, Architectural Adapter Plates (AAP), AAP Mounting Frames, and MediaLink® Controllers. Each box can be surface

mounted on a tabletop or wall for convenient access to connectors and controls.

The back and bottom of the boxes feature AAP openings. Blank AAP panels are included to ll unused openings.

This guide provides information for a qualied, experienced installer to install an SMB surface mount box.

SMB 104

Four-gang

Surface Mount Box

SMB 105

Five-gang

Surface Mount Box

SMB 103

Three-gang

Surface Mount Box

SMB 102

Two-gang

Surface Mount Box

SMB 101

Single-gang

Surface Mount Box

SMB 107

Seven-gang

Surface Mount Box

Recommended Fasteners

Choose the appropriate type of screw or bolt for the mounting surface (see the table below). The mounting holes in the bottom

panel of the SMB accommodate #6 or 1/4 inch screws.

Wall Type Fasteners Min. Size Fastener

Quantity

Drill Bit Size Notes

Drywall Toggle bolts 3/16 inch At least 3 1/2 inch Min. 3/8 inch wall thickness

Solid wood Wood screws #6 with a washer At least 3 3/32 inch Min. 3/8 inch wall thickness

Masonry Masonry screws 1/4 inch At least 3 3/16 inch masonry bit Do not mount to masonry joints.

Grounding

The bottom plate includes a #6‑32 stud insert for grounding; a grounding nut is included with each SMB.

Mounting the SMB

NOTES:

• This unit must be installed in accordance with the National Electrical Code and with all local codes.

• Ensure that the installation meets the local and state regulatory requirements, including building, electrical,

and safety codes, and ADA accessibility requirements.

• Ensure that there are no utility cables or pipes at the intended location that might be damaged or cause injury

when installing the box.

The SMB can be mounted on any interior wall type or on a tabletop. Knockouts allow for raceways to be run from the top or

rear of the box. Install the cables into the wall or raceway before mounting the box or installing any devices in the SMB. The

installation instructions apply to all models.

1 2

Indice de contenidos

Pagina 1 - Mounting the SMB

1IMPORTANT:Refer to www.extron.com for the complete user guide, installation instructions, and specifications.SMB 100 Series • Installation GuideThe E

Pagina 2 - Cable Routing

SMB Series Surface Mount Boxes • Installation Guide (Continued)ExtronHeadquarters+800.633.9876 Inside USA/Canada OnlyExtronUSA-West ExtronUSA

Comentarios a estos manuales

Sin comentarios

Extron-electronics SMB 100 Series Installation Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware Extron-electronics SMB 100 Series Installation. Extron Electronics SMB 100 Series Installation User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Extron-electronics SMB 100 Series Installation