Extron-electronics TLP Pro 720C Setup Guide Manual de usuario descargar pdf

Product Category

TLP Pro 720C • Setup Guide

Overview

The Extron TLP Pro 720C is a 7 inch Cable Cubby touchpanel with a ip-up, 800x480 LCD touchscreen with 18-bit color depth.

It is ideal for any AV application requiring a full-size, Cable Cubby touchpanel with a customizable interface. This guide provides

instructions for experienced installers to mount and install a TLPPro 720C touchpanel. For more complete instructions, see the

TLPPro 720C User Guide, at www.extron.com.

Setup Checklist

Get Ready

 Download and install the latest version of the following software:

Global Configurator Professional or Global Configurator Plus — for setting up and conguring the control processor and

touchpanel.

GUI Designer — for designing layouts for Extron TouchLink

Pro touchpanels and third party touch interfaces.

Both software programs are available from www.extron.com.

 Obtain the following network information from your network administrator:

 DHCP status (on or off). If DHCP is off, you will also require

 IP address  Subnet mask  Gateway

 User name — by default these are either admin or user.

 Passwords — by default these are either extron (for admin) or the eld is left blank (for user).

 Make a note of the touchpanel MAC address.

 Make sure you are familiar with all the included parts and have all the necessary tools (see page 2) for installing the cable

cubby.

Included Parts

With Power

Module

Without Power

Module

AC Power Module* 1 0

Pass-through AAPs

†

3 3

Blank AAPs 6 6

1-position bracket kit 0 1

2-position bracket kit 3 4

3-position bracket kit 1 1

NOTES:

* Inside the US, the TLP Pro 720C can be purchased with or without an AC power module. Outside the US, see

www.extron.com to nd an AC power module for your country.

†

Active or Passive AAPs must be purchased separately (see www.extron.com).

TLP Pro 720C

Table Clamps

AC Power Module*

Blank AAPs

Pass-thru AAPs

Extron

Removal Tool

Zip Ties

#4−40 Screws

and Nuts

2 Pos

AAP Shelf Bracket Kits

(2 brackets/kit)

3 Pos1 Pos

1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - TLP Pro 720C • Setup Guide

1Product CategoryTLP Pro 720C • Setup GuideOverviewThe Extron TLP Pro 720C is a 7 inch Cable Cubby touchpanel with a ip-up, 800x480 LCD touchscreen w

Pagina 2 - Mounting

2TLP Pro 720C • Setup Guide (Continued)Tools Required for InstallationSafety GlassesPhillips Screw DriverTape Measure1/4" Hex Nut DriverMarking P

Pagina 3 - Step 2 — Cut the Surface

3Product CategoryStep 1 — Obtain Cut-out DimensionsATTENTION:• The opening in the table for the Cable Cubby should be cut only by licensed and bonde

Pagina 4 - Step 6 — AAP Assembly

4TLP Pro 720C • Setup Guide (Continued)Step 3 — Run all CablesRun all cables necessary to support the AC connector, the cables stored in the cubby, an

Pagina 5

5Product CategoryStep 7 — Install the AAP Assembly1. From under the table, push the rst AAP assembly through the bottom of the enclosure. The holes

Pagina 6 - Connecting the TLP Pro 720C

6TLP Pro 720C • Setup Guide (Continued)Connecting the TLP Pro 720CThe cable connections are located in a panel on the bottom of the TLP Pro 720C:AABBA

Pagina 7

7Product CategoryFront Panel FeaturesTo see all the front panel features, remove the bezel, using the Extron Removal Tool. For a complete description

Pagina 8 - Setup Menu

868-2406-50 Rev. A04 14Extron Headquarters+1.800.633.9876 (Inside USA/Canada Only)Extron USA - West Extron USA - East+1.714.491.1500 +1.919.850.1000

Comentarios a estos manuales

Sin comentarios

Extron-electronics TLP Pro 720C Setup Guide Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware Extron-electronics TLP Pro 720C Setup Guide. Extron Electronics TLP Pro 720C Setup Guide User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Extron-electronics TLP Pro 720C Setup Guide