Specifications — CSVEQ 100 D
1
Extron CSVEQ 100 D Line Driver with Active Audio Buffering • Specications
Video
Gain ������������������������������������������������� Composite video and Y of S-video: -1 dB to +3 dB (x0�9 to x1�4), adjustable
C of S-video: 0 dB to +10 dB (x1 to x3), adjustable
Equalization
����������������������������������� 0 dB to +7 dB (x1 to x2) at 5 MHz, adjustable
Bandwidth (Y of S-video) ������������� 185 MHz (-3 dB)
Output cable driving distance ����� Up to 1000' (300 m) with Extron MHR cable
Video input
Number/signal type ��������������������� 1 S-video, 1 composite video
Connectors ������������������������������������� 1 female 4-pin mini DIN, 1 female RCA
Nominal level �������������������������������� 1 Vp-p for Y of S-video, and for composite video (including sync)
0�3 Vp-p for C of S-video
Minimum/maximum levels �������� 0�4 to 2�0 Vp-p with no offset at unity gain for composite video (including
sync) or for Y of S-video
Impedance
�������������������������������������� 75 ohms
Return loss �������������������������������������� <-25 dB @ 0 to 5 MHz
DC offset (max� allowable)����������� 4�0 V
Input coupling ������������������������������� AC
Video output
Number/signal type ��������������������� 1 composite video, 1 S-video
Connectors ������������������������������������� 3 female BNC attached via 4" pigtails
Nominal level �������������������������������� 1 Vp-p for Y of S-video, and for composite video (including sync)
0�3 Vp-p for C of S-video
Minimum/maximum levels �������� 0�4 to 2�0 Vp-p (follows input)
Impedance �������������������������������������� 75 ohms
Return loss �������������������������������������� -30 dB @ 5 MHz
DC offset ����������������������������������������� ±5 mV with no input signal
Floating: +0�1 to -0�6 V, depending on input signal content
Sync
Standards ���������������������������������������� NTSC 3�58, NTSC 4�43, PAL, SECAM
Audio
Gain ������������������������������������������������� Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response ���������������������� 20 Hz to 20 kHz, +0�5 dB
THD + Noise ���������������������������������� 0�03% @ 1 kHz at nominal level
S/N �������������������������������������������������� >90 dB at maximum output (unweighted)
Stereo channel separation ������������ >80 dB @ 1 kHz
Output cable driving distance ����� Up to 1000' (300 m) with Extron STP cable
Audio input
Number/signal type ��������������������� 1 stereo unbalanced
Connectors ������������������������������������� 2 female RCA
Impedance �������������������������������������� 18k ohms unbalanced, DC coupled
Nominal level �������������������������������� -10 dBV (316 mVrms)
Maximum level ������������������������������ +8 dBV, unbalanced at 1% THD+N
N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type ��������������������� 1 stereo or dual mono (switch-selectable), balanced/unbalanced
Connectors ������������������������������������� (1) 3�5 mm direct insertion captive screw connector, 5 pole
Impedance �������������������������������������� 50 ohms unbalanced, 100 ohms balanced
Comentarios a estos manuales