Extron electronics MPX 423 A Instrucciones de operaciones descargar pdf (Pagina 39)

MPX 423 A • Ethernet Control 6-5

Unit Name

This name field can be changed to any valid name, up to 12 alphanumeric

characters.

The following characters are invalid in the matrix name: {space} ~ @ = ‘ [

] { } < > ’ “ ; : | \ and ?.

DHCP

The Dynamic Host Configuration Protocol (DHCP) is an Internet protocol for

automating the configuration of computers that use TCP/IP. DHCP can be used to

automatically assign IP addresses, deliver TCP/IP stack configuration parameters

such as the subnet mask and default router, and provide other configuration

information such as the addresses for printer, time and news servers. For specific

settings information, see your system administrator.

IP Address

The MPX 423 A IP Address field contains the IP address of the connected matrix

switcher. This value is encoded in the flash memory in the switcher.

Valid IP addresses consist of four 1-, 2-, or 3-digit numeric subfields separated by

dots (periods). Each field can be numbered from 000 through 255. Leading zeroes,

up to 3 digits total per field, are optional. Values of 256 and above are invalid.

The default address is 192.168.254.254, but if this conflicts with other equipment at

your installation, you can change the IP address to any valid value.

Editing the Extron IP address while connected via the Ethernet port can

immediately disconnect the user from the matrix switcher. Extron recommends

editing this field using the RS-232 link and protecting the Ethernet access to

this screen by assigning an administrator’s password to qualified and

knowledgeable personnel only.

Edit this field as follows:

1. Click in the MPX 423 A IP address field. The graphic cursor becomes a text

cursor.

2. Edit the address as desired.

3. Press the Tab key on the keyboard or click in another field to exit the IP

Address field.

4. Click on the Submit button to make the address change take affect.

Gateway IP address

The Gateway IP Address field identifies the address of the gateway to the mail

server to be used if the MPX 423 A switcher and the mail server are not on the same

subnet.

The gateway IP address has the same validity rules as the system IP address.

Subnet mask field

The Subnet Mask field is used to determine whether the MPX 423 A switcher is on

the same subnet as the mail server when you are subnetting.

Hardware address field

The hardware address is hard-coded in the switcher and cannot be changed.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 55 56

Comentarios a estos manuales

Sin comentarios

Extron electronics MPX 423 A Instrucciones de operaciones Pagina 39

Comentarios a estos manuales

Relacionado con productos y manuales para Los conmutadores de red Extron electronics MPX 423 A