Extron electronics MTP 15HD RS Series Guía de usuario

68-925-02 Rev. F08 11High Resolution Video and Serial LinkMTP Transmitters and ReceiversMTP 15HD RS SeriesUser GuideTwisted Pair

Installation and OperationThis section provides information on: Installation and Operation Overview Front Panel Features Transmitter Rear Panel

Front Panel FeaturesSee figure 3 below to identify the front panel features on the transmitter and receiver.MTP RL 15HD RS receiverMTP T 15HD RS transm

d Select button (SEQ model only) — This recessed button selects the Red, Green, or Blue video signal to adjust and resets all three video signals to

Transmitter Rear Panel FeaturesFigure 4 shows an MTP T 15HD RS transmitter, which has all of the connectors and other features that are on either tran

d RS-232 connector — Connect a serial communications port to this 3.5 mm, 3-pole captive screw connector for bidirectional RS-232 communication. Wire

Receiver Rear Panel FeaturesFigure 7 shows an MTP RL 15HD RS receiver, which has all of the connectors and other features that are on either receiver

f DIP switches (RL receivers only) — A 6-pole DIP switch is used to configure the features of the MTP receivers. Horizontal sync (H Sync +) switch —

Power Supply WiringFigure 9 below shows how to wire the connector.CAUTION: Power supply voltage polarity is critical. Incorrect voltage polarity can

Use the supplied tie-wrap to strap the power cord to the extended tail of the connector.As an alternative, an Extron PS 124 Universal 12 VDC Power Sup

Skew Delay CompensationCAT 5, 5e, 6, 7, and STP201 cable can lead to registration errors between the Red, Green, and Blue video signals. Pair skew can

This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipme

Reference InformationThis section provides information about: Specications Part Number, Optional Accessories, Cables, and ConnectorsSpecications

Maximum resolution ... Up to 1920x1200 or 2048x1080 or 1080p at 300'Up to 1024x768 at 600'NOTE: Refer to the user guide f

MountingRack mount ... Yes, with optional 1U deep rack shelfFurniture mount ... Yes, with optional mi

Optional AccessoriesDescription Part NumberPS 124 multiple output 12 volt DC power supply 60-1022-01MBB 100 (1/8 and 1/4 back of rack mounting kit) 70

MountingThis section outlines the various mounting options available for the MTP 15HD RS Series transmitters and receivers: Tabletop Placement Und

Rack Mounting ProcedureThese units can be mounted on any of these optional rack systems, including: RSF 123: 3.5 inch deep, 1U rack shelf kit (part

Extron WarrantyExtron Electronics warrants this product against defects in materials and workmanship for a period of three years from the date of purc

iiiFCC Class A NoticeThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC

ContentsIntroduction ... 1About this Guide ... 1About the MTP Trans

IntroductionThis section gives an overview of the user guide. This section also describes the MTP 15HD RS Series of transmitters and receivers. Topic

About the MTP Transmitters and ReceiversThe Extron MTP T 15HD RS transmitter and MTP RL 15HD RS and MTP RL 15HD RS SEQ receivers are a system for long

The SEQ receiver also corrects the skew delay commonly encountered when CAT 5, 5e, 6, 7, or STP201 cables are used for RGB video, component video, and

VideoFormatPre-Peak offPre-Peak onMax. distance (high quality) Max. distance (variable quality)Composite, S-video, Component800'(245 m)1000&apo

Receiver JumperingBy default, the receiver is unidirectional, configured to send serial data from the transmitter to the receiver, only. If the system