Extron-electronics MVX Plus 128 VGA A User Guide Manual de usuario descargar pdf (Pagina 136)

HTML Operation, cont’d

MVX Plus 128 VGA A Matrix Switcher • HTML Operation

6-14

PRELIMINARY

Changing the input gain and attenuation

Users can set each input’s level of audio gain or attenuation (-18 dB to +24 dB) from

the RGB and Audio Settings page. Audio levels can be adjusted so there are no

noticeable volume differences between sources.

Change an input’s audio level setting as follows:

1. Click the Input drop box. A drop-down scroll box appears (ﬁgure 6-12).

Figure 6-12 — Input selection drop box

2. Click and drag the slider or click on the scroll up button or the scroll down

button until the desired input is visible.

3. Click the desired input.

4. Click the Input Audio Level (dB) drop box. A drop-down scroll box appears

(ﬁgure 6-13).

Figure 6-13 — Gain drop box

5. Click and drag the slider or click on the scroll up button or scroll down

button until the desired input is visible.

6. Click the desired gain or attenuation value.

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 161 162

Sin comentarios

Extron-electronics MVX Plus 128 VGA A User Guide Manual de usuario Pagina 136