Extron-electronics MVX Plus 128 VGA A User Guide Manual de usuario descargar pdf (Pagina 32)

Operation, cont’d

MVX Plus 128 VGA A Matrix Switcher • Operation

3-6

PRELIMINARY

Esc (

) button — The Esc (

) button has two primary functions (•) and eight

secondary functions (❏):

• Cancel operations or selections in progress and reset the front panel

button indicators.

The Esc (

) button does not reset the current conﬁguration, the RGBHV button

and Audio selection button, any presets, or any audio gain or attenuation or

volume settings.

• Flashes once to indicate that the escape function has been activated.

❏ In the I/O Group mode, select group 4. See “I/O grouping” on page 3-19.

❏ In the I/O Group mode, indicate that group 4 is selected. See “I/O

grouping” on page 3-19.

❏ Increase the RGB delay of switches to the selected output. See “Setting

RGB delay” on page 3-23.

❏ Increase the audio level of the selected input. See “Viewing and adjusting

the input audio level” on page 3-32.

❏ Increase the volume of the selected output. See “Viewing and adjusting

the output volume” on page 3-36.

❏ With the Enter, Preset, and View buttons, select Serial Port Conﬁguration

mode. See “Selecting the rear panel Remote port protocol and baud rate”

on page 3-43.

❏ Select 115200 baud for the RS-232/RS-422 port in Serial Port Conﬁguration

mode. See “Selecting the rear panel Remote port protocol and baud rate”

on page 3-43.

❏ Indicate that the RS-232/RS-422 port is set to 115200 baud in Serial Port

Conﬁguration mode. See “Selecting the rear panel Remote port protocol

and baud rate” on page 3-43.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 161 162

Sin comentarios

Extron-electronics MVX Plus 128 VGA A User Guide Manual de usuario Pagina 32