Extron-electronics VN-MATRIX User Guide Manual de usuario descargar pdf (Pagina 54)

Section 3: System Configuration VN-MATRIX User Guide

Page 54 I458GB issue 6

Additional Information for Decoder Setup

Identify Mode

As an aid to setting-up a VN-MATRIX decoder

in a large or complex system, use the Identify

function to display the device name on the

display output.

Tick the Identify checkbox, then click the

update button. The device name will appear

on the display (see example right).

NOTES

 The name will only display if a valid

source is currently selected and being

displayed.

 The name only displays on the

selected output device only. It does

not appear as part of the streamed

source on other displays.

No Data Splash Mode

If a VN-MATRIX decoder cannot display a source (e.g. if no source is selected, has become

disconnected or is in the wrong format), it offers two different display options.

The required option is selected using the Nodata Splash checkbox:



Display a splash screen (see example right), or



Display the last frame of valid source data

(black if no data is available).

Device Mode

A VN-MATRIX decoder can be configured in three modes:

 enable allows the selected source to be displayed,

 disable prevents a source from being displayed (display is blank),

 standby prevents a source from being displayed (display shows ‘no data’ splash screen).

For normal operation, enable must be selected.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 137 138

Sin comentarios

Extron-electronics VN-MATRIX User Guide Manual de usuario Pagina 54