Extron electronics Distribution Amplifiers DVI DA6 Plus Guía de usuario descargar pdf (Pagina 13)

DVI DA Plus Series • Installation and Operation

2-3

Rack mounting the DVI DA4 Plus

The DVI DA4 Plus can be mounted on the following (optional)

rack shelves:

RSF 123 (3.5" deep, 1U rack shelf kit: part # • 60-190-20)

RSB 123 (3.5" deep, 1U basic rack shelf: part # • 60-604-20)

RSU 126 (6" deep, 1U rack shelf kit: part # • 60-190-10)

RSB 126 (6" deep, 1U basic rack shelf: part # • 60-604-10)

RSU 129 (9.5" deep, 1U rack shelf kit: part # • 60-190-01)

RSB 129 (9.5" deep, 1U basic rack shelf: part # • 60-604-01)

To mount the units, follow these instructions:

1. Remove the rubber feet if these have been installed on the

bottom of the unit.

2. Align the unit on the shelf and secure it to the shelf with

two 4-40 x 3/16" screws in diagonally opposite corners (see

the gure below).

3. Install false faceplate(s) or other unit(s) to the rack shelf.

4. Attach the shelf to the rack with the four provided

10-32 x 3/4" bolts.

Use 2 mounting holes on

opposite corners.

(2) 4-40 x 3/16"

Screws

1U Universal Rack Shelf

Front false

faceplate

uses 2

screws.

1/2 Rack Width Front False

Faceplate

Rack mounting the DVI DA4 Plus

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Sin comentarios

Extron electronics Distribution Amplifiers DVI DA6 Plus Guía de usuario Pagina 13