Extron-electronics MLC 206 AAP EC User Guide Manual de usuario descargar pdf (Pagina 32)

Operation, cont’d

MediaLink Controllers • Operation3-6

The buttons on the optional MLA-Remote duplicate the

MLC’s front panel controls and also those of two Control

Modules (IRCMs) for normal operation. The MLA-Remote

can also be used to control a MediaLink Switcher (MLS). The

controller, control module, or switcher responds to commands

from the MLA-Remote as if the corresponding button or knob

were pressed or turned on the controller or switcher.

From a distance of no more than 30 feet and within 40° of the

axis, the MLA-Remote sends infrared (IR) signals to

• a MediaLink Controller via the controller’s front panel IR

pickup device or the IR pickup device of an optional IR

Link IR signal repeater.

• a MediaLink Switcher via a connected IR Link. The

switcher can receive signals from the MLA-Remote only

via an IR Link.

Setup operations cannot be performed from the

MLA-Remote.

The only control modules that can be controlled via the

MLA-Remote are the IRCM-VCR and IRCM-DVD.

The MLA-Remote’s Display Power button and the VCR and

DVD control buttons will not function until commands have

been stored in the MLC’s memory. The MLA-Remote’s VCR

buttons control the first (lowest address numbered) IRCM-

VCR connected to the MLC. The DVD buttons control the

first (lowest address numbered) IRCM-DVD connected to the

MLC.

MLA-Remote

IR remote control

Commands are transmitted from the MLC’s Display/Source Control RS-232 port

(via hard wiring) and IR ports (via IR Emitters or optional IR Broadcaster) when the

corresponding button is pressed on the MLA-Remote or on the controller’s or

control module’s front panel. Refer to the Control Modules User’s Manual.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 71 72

Sin comentarios

Extron-electronics MLC 206 AAP EC User Guide Manual de usuario Pagina 32