Extron-electronics PowerCage FOX Tx_Rx HDMI User Guide Manual de usuario Pagina 31
- Pagina / 49
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Command and Response Table for Receiver SIS Commands (continued)
Command ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Video shutdown delay
NOTES: • The Set Video Delay command delays the digital video to help monitors sync correctly during an input rate change.
• Only video is delayed. Embedded audio is not delayed.
Set delay
3*
X2)
# Dly
X2)]
Delay video by an interval of
X2)
.
Example:
3*3#
Dly3
]
Delay video by an interval of 0.75 seconds
(3 x 0.25 seconds).
View delay
3#
X2)]
Switch and signal status requests
Request Audio switch status
E
Stat
}
EmbedAud
X2!]
Show the position of the Audio switch:
0 = off (embedded audio is muted) or 1 = on (unmute).
NOTE: The audio on the captive screw audio output always remains active regardless of the setting of this switch.
Check audio embed
E
5Stat
} X1)]
Show if audio is embedded in the video stream:
0 = not detected or 1 = detected.
View link 1 (Tx-to-Rx) status
1S
X1)]
View link 2 (Rx-to-Tx) status
2S
X1)]
View input video status
3S
X1)]
View input audio status
4S
X1)]
View all signal status
5S
SigI
X1)
•SigO•HdcpI
X1)
•HdcpO
X1)]
Report the status of the HDMI input, HDMI output,
HDCP encoding on the input, and HDCP encoding
on the output.
View HDMI signal status
6S
SigI
X1)
•SigO– –
]
Report the status of the HDMI input and HDMI output
(always -- for a transmitter).
View HDCP status
7S
HdcpI
X1)
•HdcpO
X1)]
Report the status of the HDCP encoding on the
input and HDCP encoding on the output.
View temperature
20S
X1!
F•
X1!
C
]
Show temperature in degrees Fahrenheit and Celsius.
Information requests
Information request
I
1Lnk
X1)
•2Lnk
X1)
•Vid
X1)
•Aud
X1)
•
X1@
•Rx
]
The unit responds with the current status (signal
detected) of optical link 1, optical link 2, the
video input, and the audio link; the fiber optic
transmission mode (singlemode or multimode); and
the device type (Rx).
Show firmware version
Q
X1#]
Example:
Q
1.23
]
The factory-installed firmware version is 1.23 (sample
value only).
Request part number
N
70-889-nn
]
nn = 22 (singlemode) or 21 (multimode).
Resets
Reset memory presets
E
ZG
}
Zpg
]
Reset (erase) all memory presets.
System reset
E
ZXXX
}
Zpx
]
Reset all settings to factory defaults.
NOTE: X( = Mute and auto memory status 0 = off 1 = on
X2! = Switch position 0 = off (right) 1 = on (left)
X1) = Link status 0 = light or signal input not detected
1 = light or signal detected
X2) = Video delay 0 = 0 second
(0 plus six steps at 0.25 seconds per step) 1 = 0.25 second 3 = 0.75 second 5 = 1.25 second
2 = 0.5 second (default) 4 = 1.0 second 6 = 1.5 second
X1# = Firmware version v.vv
X1! = Internal temperature nnnF•nnC
PowerCage FOX HDMI • Remote Control 25
- PowerCage FOX Tx/Rx HDMI 1
- User Guide 1
- Safety Instructions • English 2
- 安全须知 • 中文 2
- FCC Class A Notice 3
- Software Commands 4
- Contents 5
- About this Guide 7
- Transmitter and receiver 9
- System Compatibility 9
- Cable Transmission Modes 9
- Features 10
- Mounting the Units 11
- OVER FIBER 12
- Receiver 13
- Transmitter 13
- (page 7) (page 7) 14
- PowerCage backplane 15
- Making Connections 16
- RS-232 connectors 17
- Pin 1 and pin 2 are 18
- DIP switches — 19
- 2 3 6541 20
- Operation 22
- Remote Control 23
- Host-to-unit Instructions 24
- Unit-initiated Messages 24
- Error Responses 24
- Command ASCII Command 26
- Response 26
- Additional Description 26
- FOX Extenders Control Program 32
- Status area 34
- Control tab functions 35
- Video Adjustment area 35
- Audio Adjustment area 35
- Memory Preset area 35
- Mute area 35
- Output Configuration area 36
- HDCP area 36
- Assigned EDID area 37
- Plus Mode Transmission area 37
- Video Bit Depth area 37
- Advanced tab functions 38
- Advanced Configuration area 38
- Firmware Upgrade 39
- Folder where 40
- Reference 43
- Information 43
- Control/remote 45
- Part Numbers 46
- Adapters 47
- Screws (2 per card) 48
- 8 double board slots 48
- Contact Information 49
- Extron Warranty 49
Relacionado con productos y manuales para Hardware Extron-electronics PowerCage FOX Tx_Rx HDMI User Guide
(2 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.105 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales