Extron-electronics SCS 300 User Guide Manual de usuario descargar pdf (Pagina 14)

SCS 300 • Installation, Connection, and Settings

2-7

Rear Panel Features and Connection

The rear panel has three main features:.

POWER

12V

0.4A MAX

INPUT

R G B H/HV V

SCS 300

OUTPUT

Figure 2-7 — Rear Panel features

Power connection point — This dedicated female,

3.5mm, 2-pole captive screw connector enables

connection of the 12 VDC external power supply. Wire

the power supply cord into the supplied male orange

connector as shown in ﬁgure 2-8.

Power supply voltage polarity is critical. Incorrect

voltage polarity can damage the power supply and

the SCS 300. Identify the power cord negative lead

by the ridges on the side of the cord (ﬁgure 2-8).

The length of the exposed (stripped) copper wires

is important. The ideal length is 5/16” (7 mm).

Longer bare wires can short together. Shorter wires

are not as secure in the captive screw connectors

and could be pulled out.

N Do not tin the stripped power supply leads before

installing the captive screw connector. Tinned wires are

not as secure in the captive screw connector and could be

pulled out. Use the supplied tie warp to strap the wires to

the connector.

Power Supply

Output Cord

Orange Captive

Screw Connector

SECTION A–A

Ridges

Smooth

A A

Tie Wrap

POWER

12V

0.4A MAX

Figure 2-8 — Wiring the power connector

POWER

12V

0.4A MAX

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comentarios a estos manuales

Sin comentarios

Extron-electronics SCS 300 User Guide Manual de usuario Pagina 14

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Extron-electronics SCS 300 User Guide