Extron-electronics MPA 152 User Guide Manual de usuario descargar pdf (Pagina 12)

Audio Inputs

INPUTS

Figure 4. Audio Inputs

RCA input connectors — These two connectors (left

and right) accept unbalanced, line level audio signals.

The input can be stereo (using two RCA jacks) or mono

(using a single RCA jack plugged into the left socket). If

unused, the connectors automatically terminate to lower

the noise ﬂoor.

3.5 mm stereo input — This Tip-Ring-Sleeve (TRS)

connector accepts unbalanced, line level audio signals.

If unused, the connector automatically terminates to

lower the noise ﬂoor.

Balanced or unbalanced audio input connector — This

5-pole, 3.5 mm captive screw input accepts balanced or

unbalanced, mono or stereo, line level signals. See the

attention and note on page 5 for important information about

connecting wires to captive screw connectors.

The three left channel inputs (RCA, TRS and captive screw) are summed to provide a

single left channel output. The three right channel inputs are summed to provide a single

right channel output.

Depending on the position of the front panel toggle switch (see figure 7 on page 9), the

right and left channels may be output as a stereo signal, or averaged and output as a

dual mono signal.

Tip (+)

Sleeve ( )

RCA Connector

Sleeve ( )

Ring (R)

Tip (L)

3.5 mm Stereo

Plug Connector

Unbalanced Stereo Input

Balanced Stereo Input

Tip

Ring

Tip

Ring

Sleeves

Tip

Sleeve

Tip

MPA 152 • Panels and Cabling 6

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Comentarios a estos manuales

Sin comentarios

Extron-electronics MPA 152 User Guide Manual de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios para vídeo Extron-electronics MPA 152 User Guide