Extron electronics Matrix 200 Guía de usuario descargar pdf (Pagina 118)

Telnet Interface – Quick Reference

Starting Telnet

1. Click the Windows Start button and click on Run.

In the Open box, type telnet then press the <Enter> key.

The telnet application will start in a separate window:

1. At the prompt, type open followed by the Ip address of the VN 200 controller and the

telnet port number (9999), then press <Enter>. For example:

open 192.168.0.18 9999 <Enter>

2. At the command prompt, type user admin, then press <Enter>.

3. Then type pass followed by a space and the appropriate password, then press

<Enter>.

NOTE: By default the password is admin, but this can be changed via the web

interface, see “Changing User Login Passwords”).

4. Type further commands as required (see “Serial / Telnet Commands” for command

options).

5. To logout, type exit followed by <Enter>.

VN-Matrix 200 Series • Technical Data 113

1 2 ... 113 114 115 116 117 118 119 120 121 122 123

Sin comentarios

Extron electronics Matrix 200 Guía de usuario Pagina 118