Extron-electronics Cable Retraction System User Guide Manual de usuario descargar pdf (Pagina 32)

Cable Retraction System • Maintenance and Adjustments 26

5. Slowly lower the system and allow it to hang vertically. If the system was mounted

vertically, it is already in this position.

6. Make certain the retractors are supported so they will not drop unexpectedly.

CAUTION: All retractors attached to the enclosure mounting bolt will drop when

the enclosure mounting bolt is removed.

7. Remove the enclosure mounting bolt. The retraction system is now detached from the

Cable Cubby.

Remove enclosure

mounting bolt.

Support the

retraction system.

Slide system

down and out.

Figure 27. Removing the Cable Retraction System

8. Slide the system down and out to remove it from the Cable Cubby.

To Replace the System:

Reverse the previous steps making certain the system is correctly oriented to the Cable

Cubby enclosure.

1 2 ... 27 28 29 30 31 32 33 34 35 36

Sin comentarios

Extron-electronics Cable Retraction System User Guide Manual de usuario Pagina 32