Extron electronics VoiceLift Guía de instalación descargar pdf (Pagina 18)

Pull the cable(s).

1. Pull the cables to the receiver.

a. Pull the communication/power Ethernet cable through

the receiver’s base, along with any other cables that will

be attached to the receiver (RS-232, Ethernet cable to a

secondary receiver, etc.)

b. If mounting to a wall and using a raceway, place the

cables in the raceway and replace the raceway cover.

2. Connect the cables to the receiver.

a. Connect the Ethernet cable to the Receiver Out port (the

RJ-45 connector on the left on the receiver base).

Place the cables in the raceway and

replace the raceway cover.

Connect the Ethernet cable to the

Receiver Out RJ-45 jack.

VoiceLift Microphone Installation • Installation — Stage 2

2-10

Installation — Stage 2, cont’d

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

Sin comentarios

Extron electronics VoiceLift Guía de instalación Pagina 18