Extron electronics VoiceLift Guía de instalación descargar pdf (Pagina 25)

2. Congure the MLC 104 IP Plus.

a. Using Global Congurator, congure the MLC’s

Digital I/O port for digital input with pull-up.

b. Conﬁgure a monitor to send an e-mail when the

Digital I/O port closes.

 RefertotheGlobalConguratorhelplefor 

MLC conﬁguration instructions.

3. Test the instant alert notication.

a. Ensure that the MLC 104 IP Plus is connected to the

network.

b. Press and hold the two Volume buttons on the

microphone simultaneously for 2 seconds. The

receiver’s LED blinks alternating amber and green.

Make sure that the microphone is on either

 channelAorchannelB.

c. Check for the arrival of the e-mail notiﬁcation.

Conﬁgure the MLC’s Digital I/O port for

digital input with pull-up.

Press and hold both Volume buttons

for 2 seconds.

Press and hold both

volume buttons

simultaneously.

2-17

VoiceLift Microphone Installation • Optional Installation Example — Instant Alert

1 2 ... 20 21 22 23 24 25 26 27 28 29 30

Sin comentarios

Extron electronics VoiceLift Guía de instalación Pagina 25