Extron electronics Receivers TP Series Guía de usuario descargar pdf (Pagina 11)

Mounting Options Overview

The three inch deep, one inch high, quarter-rack width USBExtender transmitters and

receivers can be placed on a tabletop, mounted on a rack shelf, or mounted under a desk

or tabletop. The receiver can be mounted on a projector bracket.

The USB Extender AAPs can be wall or floor mounted in two-gang, 2.5 inch deep boxes.

The Decora series can be mounted in a single-gang, 2.5 inch deep wall box.

Mounting details are included in Mounting the USB Extender in the reference section.

Mounting instructions are included with each optional mounting kit.

CAUTION: Installation and service must be performed by authorized personnel only.

Connection Guidelines

The USB Extenders can be installed in existing and new systems within the following

guidelines:

• USB Extenders cannot be cascaded (you cannot sequentially connect a set of USB

extenders to another set of USB extenders).

• The maximum number of USB hubs that can be connected downstream is four, with a

maximum total of 14 USB devices.

• The USB Extender is able to support a maximum of 14 downstream USB devices

(including hubs). For example, if two 4-port USB hubs are connected to a receiver, that

totals ten downstream devices (two hub connections plus the eight hub ports).

USB Extenders • Installation and Operation 5

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 22 23

Sin comentarios

Extron electronics Receivers TP Series Guía de usuario Pagina 11