Extron-electronics FOX SW8 User Guide Manual de usuario descargar pdf (Pagina 23)

FOX SW8 • Remote Control 17

5. Click Next. The program extracts the firmware files and places them in a folder

identified in the InstallShield Wizard window.

NOTE: Note the folder to which the firmware file is saved.

6. Click Finish to exit the program.

7. Connect a computer that runs the Windows operating system to either the RS-232 port

or the Configuration port of the switcher (see Installation and Operation on page 4

for more details).

8. Start the Universal Switcher Control Program and connect to the front panel

Configuration (USB) port on the switcher (see Starting the program, on page 13).

9. Click Tools > Update firmware or the Update Firmware button ( ). The Extron

Firmware Loader appears (see figure 16).

Figure 16. Extron Firmware Loader Window

10. Select the FOX SW8 and click File > Open. The Choose Firmware File screen appears

(see figure 17).

Figure 17. Choose Firmware File Window

11. Navigate to and select the new firmware file. Click Open. The Choose Firmware File

window closes.

ATTENTION: The ﬁrmware ﬁle must have an .S19 extension. Other ﬁle types can

cause the switcher to stop functioning.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29

Sin comentarios

Extron-electronics FOX SW8 User Guide Manual de usuario Pagina 23