Extron electronics MGP Pro Series Guía de usuario descargar pdf (Pagina 75)

WindoWall Pro Series • Reference Information 69

Rack Mounting Procedure

For optional rack mounting, do not install the rubber feet. Mount the WindoWall Pro in the

rack as follows:

1. Attach the included rack/through-desk mounting brackets to the unit, using eight of the

machine screws supplied with the mounting kit (see figure 46).

2. Insert the unit into the rack and align the holes in the mounting brackets with the holes

in the rack. Use four machine screws to attach the brackets to the rack.

MBD 249

2U Rac

k Mounting

Bra

cket (Use four

wer holes.)

Figure 46. Rack Mounting a WindoWall Pro

IP Addressing

What is an IP Address?

An IP address is a 32-bit binary number that is used to identify each device on an Ethernet

network. This number is usually represented by four decimal numbers (called “octets”), each

in the range of 0 through 255 and separated by dots; for example, 198.123.34.240. This is

called “dotted decimal notation.”

An IP address is divided into two parts:

• Network identifier

• Host identifier

Each address on a given network must have the same network identifier value but have a

unique host identifier. As a result, there are different classes of addresses that define the

range of valid addresses and the parts of the address that are used for the network and

host identifiers.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 89 90

Sin comentarios

Extron electronics MGP Pro Series Guía de usuario Pagina 75