Extron-electronics FOX DA8 User Guide Manual de usuario descargar pdf (Pagina 18)

3. Select the Com port to which your DA8 is connected. Click OK.

The FOX Extender program window appears (see ﬁgure10).

4. Mute or unmute individual outputs or all outputs by clicking the appropriate buttons.

WARNING: The channel mute command mutes the data on the output only. The

output continues to emit light.

Figure 10. FOX Extender Program Window

Firmware Upgrade

Firmware can be upgraded via the front panel Conﬁguration port of the unit only, using the

Extron Firmware Loader utility from the FOX Extender program.

Upload replacement rmware as follows:

1. Visit the Extron website, www.extron.com, click the Download tab.

2. On the Download Center page, click the Firmware (a) link (see ﬁgure 11).

Figure 11. Accessing Firmware Upgrade Files

3. Select the appropriate ﬁrmware ﬁles to download and copy them to your computer.

Note the folder to which you save the ﬁrmware ﬁles.

4. In the Windows Explorer or other le browser, double-click the downloaded executable

(*.exe) ﬁles to self-extract the ﬁrmware ﬁles.

5. Connect a Windows-based computer to the front panel Conguration port of the unit

to be updated (see “Installation and Operation”).

6. Start the FOX Extender program (see “Starting the Program”).

Extron FOX DA8 • Remote Control 12

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25

Sin comentarios

Extron-electronics FOX DA8 User Guide Manual de usuario Pagina 18