Extron-electronics HDXP Plus Series User Guide Manual de usuario Pagina 29

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 125
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 28
HDXP Plus Series Switchers • Operation 23
5. Press and release the Enter button.
ENTER
All input and output buttons
become unlit or return to
background illumination.
Press the Enter button to
confirm the configuration
change.
The Enter b
utton
becomes unlit or retur
ns to
bac
kground illumination.
Figure 28. Confirming the Tie Removal
The configuration now is:
Input 5 tied to output 1, output 3, and output 8 (see figure 29).
Input 5 tied to
outputs 1, 3, 4, and 8.
Input
Output
1
3
8
5
Figure 29. Example 3, Final Configuration
Previewing an Input
You can preview any input by switching it to the preview output when the HDXP is in
preview mode. To preview an input:
1. Press the Esc
>
button to clear any input, output, or control button indicators that
may be lit.
2. Press the Preview button in the I/O section. The Preview button lights red (the Matrix
button is unlit).
I / O
MATRIX PREVIEW
Press the Pre
view button to enter preview mode.
The b
utton lights red when selected.
Figure 30. Selecting Preview Mode
NOTE: If an input has already been selected in preview mode, its button also
lights red when you press Preview.
Vista de pagina 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 124 125

Comentarios a estos manuales

Sin comentarios