
HDXP Plus Series Switchers • Operation 31
4. Press and release the Enter button. The current configuration is now stored in the
selected memory location.
C O N T R O L
PRESET
ENTER
ESCVIEW
uttons
n to
kground illumination.
Press the Enter button to
save the preset.
All input buttons become unlit or
return to background illumination.
Figure 46. Press the Enter Button
Recalling a preset
Follow these steps to recall a preset (set of ties) to be the current configuration. The steps
below show the front panel indications that result from your action.
NOTE: The illustrations for this procedure show the HDXP 3216. However, the
information applies to all HDXP models.
1. Press and release the Esc
>
button.
CONTROL
PRESET
ENTER
ESCVIEW
>
to clear all selections.
Figure 47. Clear All Selections
2. Press and release the Preset button.
PRESET
1 2
17 18
17 18
1 2
Press and release the Preset button.
The Preset button lights.
All input buttons with
assigned presets light red.
(Preset Assigned)
Unlit
Inputs
Figure 48. Entering Recall Preset Mode
In the example in figure 48, the Input 2 button lights red, because a preset has been
assigned to it. Input button 17 does not light, because no preset has been assigned
to it.
Comentarios a estos manuales