Extron-electronics MLC 226 IP Series Installation Manual de usuario descargar pdf (Pagina 61)

4-17

MLC 226 IP Series • Software-based Conﬁ guration and Control

PRELIMINARY

Setting up passwords

1. Install and start the Extron Global Conﬁ gurator (GC) software. See page 4-9.

2. Open an existing GC project or start a new project. Refer to the GC help ﬁ le or

the MLC 226 IP Series Setup Guide for instructions.

3. Click Tools and select Change Device Settings from the drop-down menu.

4. In the Device Settings window, select (click on) the desired MLC in the list

that appears on screen.

5. Click Settings and choose Set Administrator

Password from the drop-down menu, as shown

at right. A Set for <IP address> window appears.

6. Type the Administrator password into both areas

of the window and click OK.

The Set for... window closes.

7. Click the Close button.

8. Complete the rest of the conﬁ guration, then save the project: click File and

then Save or click the Save icon, shown below

9. Upload (build) the conﬁ guration to the MLC. The Upload Manager window

appears, as shown below.

10. Click Exit after the ﬁ les have been uploaded.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 163 164

Sin comentarios

Extron-electronics MLC 226 IP Series Installation Manual de usuario Pagina 61