Extron-electronics MLC 226 IP Series Installation Manual de usuario descargar pdf (Pagina 71)

4-27

MLC 226 IP Series • Software-based Conﬁ guration and Control

PRELIMINARY

• IR Drivers — This Web page lists IR driver ﬁ les only and allows you to select a

ﬁ le to see and execute the commands stored in them. This page is available only

to those logged in with administrator level access.

The MLC must ﬁ rst be conﬁ gured with Global Conﬁ gurator before this page can

be used.

An example for a speciﬁ c IR driver is shown below.

• Serial Devices’ Drivers — Once the ports have been set up in the conﬁ guration

program, each conﬁ gured serial port (projector control port and any IR/Serial

control ports) is listed in this section of the Control page

menu.

Click on a port name to bring up a page that shows the

available commands for the device cabled to that port. See

the sample screen shots on the next page.

If you want to execute a command that is available in the driver (whether

associated with an MLC button or not) for a conﬁ gured device, you can click on a

button or select an option from a pull-down menu to execute that command.

You must use Microsoft Internet Explorer version 6.0 or higher with Active X

enabled in order to use the serial devices’ control pages.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 163 164

Sin comentarios

Extron-electronics MLC 226 IP Series Installation Manual de usuario Pagina 71