Extron-electronics FOX DA8 Plus User Guide Manual de usuario descargar pdf (Pagina 17)

Symbol Definitions

Symbols (variables), defined below, are used in the command and response table. The

symbols represent variables in the command and response table fields.

] = Carriage return and line feed

} = Carriage return (no line feed)

• = space

X! = Output 1 through 8

X@ = Mute status 0 = off (unmuted) 1 = on (muted)

X# = Reclockable input number 00 = all inputs

01 = input 1 (group A) 03 = input 3 (group B)

05 = input 5 (group C) 07 = input 7 (group D)

X$ = Input reclocker rate 00 = Bypass (no reclocking) 02 = 2.125 Gbps

01 = 1.25 Gbps 03 = 4.25 Gbps (default)

X% = Name Up to 24 alphanumeric characters, excluding spaces or blank characters. The

ﬁrst character must be alphabetic and the last character cannot be a hyphen or

or minus sign.

X^ = Firmware version Vx.xx

X& = Transceiver module status 0 = no light input 1 = light input

X* = Temperature nnnF = whole degree Fahrenheit

X( = Transceiver module status 0 = no module installed 2 = singlemode 1 = multimode

X1) = DA conﬁguration switch position 1 = 1x8 DA (Default) 2 = Two 1x4 DAs 3 = Four 1x2 DAs

Command and Response Table for SIS Commands

Command Function

ASCII Command

(Host to Unit)

Response

(Unit to Host)

Additional Description

Mutes

NOTE: The channel mute commands mute the data on the output only. The output continues to emit light.

Mute output

*1B Vmt

]

Blank data on optical output

Unmute output

*0B Vmt

]

Output data on optical output

Show video mute status

X@]

Output

data output mute status is

Mute all outputs

1*B

Vmt1

]

Blank data on all optical outputs.

Unmute all outputs

0*B

Vmt0

]

Output data on all optical outputs.

Show mute status of all outputs

} X@

...

]

Show output 1 through output 8 mute

status.

Reclocking

Set reclocker mode

= Rte

X$]

Set the reclocker mode for input

Example 1:

0*0=

Rte00*00

]

Set the reclocker mode for all inputs to

bypass (do not reclock).

Example 2:

5*2=

Rte05*02

]

Set the reclocker mode for input 5

(group C) to 2.125 Gbps.

Show reclocker mode

X$]

Device naming

Set device name

EX%

}

Ipn•

X%]

Set the name of the DA to

Example:

Active_DA_1CN

}

Ipn•Active_DA_1

]

Name the unit “Active_DA_1.”

Set device to factory default name

•CN

}

Ipn•FOX-DA8-Plus

]

View device name

} X%]

The device name is

Information Requests

Information request

V01X08•A00X00

]

V01X08 shows the number of available

inputs (1) and outputs (8) for this

product. A00X00 has no meaning for

this product.

Show ﬁrmware version

X^]

Example:

1.23

]

The factory-installed controller ﬁrmware

version is 1.23 (sample value only).

FOX DA8 Plus • Remote Control 11

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 28 29

Comentarios a estos manuales

Sin comentarios

Extron-electronics FOX DA8 Plus User Guide Manual de usuario Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios para vídeo Extron-electronics FOX DA8 Plus User Guide