Extron-electronics FOX DA8 Plus User Guide Manual de usuario descargar pdf (Pagina 20)

Starting the program

Start the Extron FOX Extenders Control Program as follows:

1. Connect a computer that runs the Windows operating system to either the RS-232 port

or the Configuration port of the DA (see “Installation and Operation,” beginning on

page 4).

2. Click Start > Programs > Extron Electronics > FOX Extenders Control

Program

> FOX Extenders.

The Communication Setup window appears (see figure 9, below).

Figure 9. Communication Setup Window

3. If necessary, select the tab, RS-232 or USB, for the port you are using for the

connection.

4. Depending on the tab that is selected, choose either:

• RS-232 tab — The Com port to which your DA is connected

• USB tab — Extron USB Device_0

5. Click Connect. The FOX Extenders Control Program window appears (see figure 10,

below.

Figure 10. FOX Extenders Program Window

FOX DA8 Plus • Remote Control 14

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 28 29

Sin comentarios

Extron-electronics FOX DA8 Plus User Guide Manual de usuario Pagina 20