
Port Settings Page
The Port Settings page is accessed by clicking on the Port Settings link on the left
sidebar of the Configuration page (see figure 80).
1
2
Figure 80. Port Settings Page
The Port Settings page is used to change the settings of the serial port and the network
port. These ports are used to communicate with the SME100 using a control PC or control
device.
a
Serial Port Settings panel
NOTE: After all of the necessary changes have been made to the following
configuration options in this panel, click the Submit button to save the configuration
settings. Clicking the Cancel button or navigating to a different web page clears
any changes that were made.
• Serial Port — This field displays the serial port number of the SME100. The serial
port number of the SME100 is always 1.
• Port Type — This field displays the type of serial port type on the SME100. The
type of serial port on the SME100 is always RS-232.
• Data Bits — This drop-down menu is used to set the number of data bits that are
used for communication with the SME100. The default is 8.
SME100 • Web-based Configuration Page 103
Comentarios a estos manuales